Please use the following details to contact us

Meridian Technique Limited
2 Venture Road
Southampton Science Park
Southampton
Hampshire
SO16 7NP
United Kingdom

Office
Tel: +44 (0) 2380 762500
Fax: +44 (0) 2380 762550
E-mail: info@orthoview.com

Support
Tel: + 44 (0) 870 3831462
E-mail: support@orthoview.com


Registered Company No. 3478202


Directions to our offices

From the North
Head South on the M3, leaving at Junction 14, following the signs for Southampton on to the A33. At the Chilworth roundabout take the 3rd exit and follow the slip road on to the A27 towards Chilworth. The Science Park is on the left after approximately one mile.

From the East
Exit the M27 at Junction 5, take the first exit at the roundabout and head South along the A335. Turn right at the first set of traffic lights into Bassett Green Road and stay on this road until the Chilworth roundabout. Take the second exit and follow the slip road on to the A27 towards Chilworth. The Science Park is on the left after approximately one mile.

From the West
Exit the M27 at Junction 3, following the signs for Romsey. At the first roundabout, take the second exit on to the A3057. At the next roundabout, turn right onto the A27 (Luzborough Lane) and then take the second exit at the next roundabout. Follow the road towards Chilworth - the Science Park is approximately 2 miles on the right.

Within the Southampton Science Park
When entering the Science Park, keep to University Parkway. You will pass the white Merck building to your right, the road will bear to the right. Take the next left turn (Venture Road). You will then see a light grey building with a curved roof to the left. Park where convenient, there is plenty of room.

Within the Building
Enter 2 Venture Road via the main entrance. Proceed up the stairs and turn right, through double doors. Follow the corridor right to the end, into The Annexe and turn right. OrthoView reception is the door on the left.

 

With its range of functions and tools, OrthoView is proving valuable in a variety of ongoing research projects.
Mr John Timperley,  Consultant Orthopaedic Surgeon, Exeter

Integrating OrthoView into MedVIEW enables us to offer a complete solution for orthopaedics
Emmanuel (Manos) Diakakis, Director of Technical Services, Aspyra Technologies Ltd


Register for Demo

Why Orthoview?
OrthoView Wizards OrthoView Wizards
These smart, interactive tools make planning and templating quick and easy
OrthoView Quickscale OrthoView QuickScale
One click is all that's needed to accurately scale the X-ray image
OrthoView Contour OrthoView Contour
Visualise plate bending on-screen for accurate planning of screw position
OrthoView Wizplates OrthoView Wizplates
Rapid sizing and positioning of trauma templates at the click of a mouse